Pneumatic Cylinders
Pneumatic Cylinder Consist Of Cast Iron Covers. Micro-honed and Hard Chrome Plated Piston Rod and Nitrile Seals. Compressed air is admitted through either of parts which pushes the Piston and the Piston Rod. While the displaced air from the apposite side is
exhausted through the other part. Various types Of Mounting arrangements are available. The Size of Cylinder should be
appropriate with force required and Air Pressure available. Adjustable Cushioning arrangement is provided as a standard feature.
Flowing Medium : Air Duty Lubricated.
Pressure : 10 Kg/Cm2 Maximum.
Temperature : 80 C Max.
Nominal Bore : 12mm To 300mm
Piston Rd Dia : 16mm To 57mm
Mounting Style : 1. Front Flange, 2. Rear Flange, 3. Front Device 4. Lug, 5. Rear Davis
6. Intermediate Trunon
USES : In cases where manual operations involving Heavy Loads, Pushing Or Pulling lead to
monotony and resultant decrease in Production. This cylinders are used to carry Out these repeated movements with Pre-determined force and stroke and can be fitted on to any machine to
Synchronize with Its Operating Cycles. In Today's age Of Automation many designers worldwide consider it worthwhile to examine the operation of their Machines and consider the numerous mechanical applications made Possible the range of Pneumatic Power Cylinders.
Hydraulic Cylinder
Hydraulic Cylinders are ideal for heavy duty application Upto 160 Kg/Cm2 Pressure. Tie Rod Construction is used for case of Maintenance.
Structural Steel Covers. Micro Honed Seamless Tubes, Ground and Hard Chrome Plated Piston rod, fabric
Reinforced Nitrile Rubber Seals and High Grade Cast Iron Piston and Bush are the main features of this Cylinders various
maintaining arrangement are available and Adjustable Cushioning arrangements are provided as Option. The Size Of Cylinder should be appropriate with force required and
Hydraulic Pressure available.
Nominal Bore Dia : 40,50,63,80,100,125, 160, 200.
Shuft Dia : 18, 18/22, 22/28, 28/36, 36/45, 45/46, 56/70, 70/90.
Mounting Style 1.Head end rectangular Flange,2. Head End
square Flange,3. Side Tap,4. Cap End Rectangular Flange, 5.Cap end square Flange
6.Cap end fixed Eye,7.Cap end fixed Clevis,8. Side Lug,9. Head end cap end Tie Rod.
10.Cap end Tie Rod, 11.Intermediate Trunon.
Accessories : Rod Eye, Rod Devis
Flowing Medium : Hydraulic Oil.
Pressure : 160 Kg/Cm2
Temperature : 80 c
Note : We Offer single acting gravity return Hydraulic Cylinders, Double Ended Cylinders, Large bore Cylinders, Non tie Rod, Cylinders, Special Seal etc. To suit your Requirement.
Silencer
This Silencers are made of Sintered Elements Industrial Plastics. Which can be directly Screwed into the
metal exhaust part of Valves. The Plain type of Silencers are used to reduce the noise due to exhaust of Air from the valve Ports. The Flow Control type Silencers can be used for controlling the Speed of cylinders.
Sintered Bronze Filter media is the recent addition to filtration Technology. A Sintered Bronze filter element is produced from Spherical Metal Powder of Closely Controlled particle size to give a rigid porous structure of Uniform
Dimensions.
Being Metallic it is resistant to impact. It is self supporting unlike other filtering media.
The ductility and Strength Of this metallic Structure increases its suitability for high pressure filtration in both direction of Flow. It may be readily Cleaned by reversing
flow or back flushing with a Solvent.
USES : Used on exhaust ports of Pneumatic Valves and Tools to Minimizes Sound Levels.
Flowing Media : Air, Gas, Oil Etc.
Pressure : 10 Kg/Cm2 Max.
Size : 1/8 BSP To 1 ½ BSP
Temperature : 70 C Max.
Non-Return Valves
The non return valve has a Spring loaded Piston fitted with an O Ring to provide leak proof sealing. The Piston opens when the pressure exceeds the force of the Spring.
The non return valve is used where the flow is required in one direction only, and the flow in opposite direction must be
blocks. The main usages is a safety device to prevent loss of pressure in the event of air reply failure.
