Flow Control Valves 
This valves consist of Aluminium body, Stainless steel Or Brass needle, knurled plastic knob and nitrites Seals. The fine threaded needle is adjusted with help of a Knurled knob large internal passage coupled with Soft Seat Poppet provide maximum flow Capacity with Minimum Pressure Drop. This valve allows full flow in one direction adjustable flow in the reverse Direction.

USES : This Valve is used to control the Speed Or Air Cylinder by throttling.
Port Size : 1/8 BSP To ¾ BSP
Maximum Pressure : 10 Kg/Cm2 (For AL F.C.U) 
                             : 5000 PSI (For M.S. F.C.U)
Temperature : 80 C
Flowing Media : Air.

Quick Exhaust Valve
The valve Consists hard anodized Aluminium body with Spring loaded Piston precision guided in the body. This design provides a rugged unit suitable for heavy duty with a long life even at high frequency Operation.

USES : This valve is used to increase the Piston speed by unrestricted flow to atmosphere from the Cylinder. By using this valve the piston speed is increased about three times. This valve is mounted directly on the Cylinder Port. It can be fitted with Silencer if required to reduce the discharge Noise.

Push Fittings 

This fittings are 'ONE TOUCH' instant, timesaving tube fittings. Push a tubing in fully to the tube end for perfect instantaneous connection. No tool is necessary for disconnecting Press. The releasing bush in by fingers While Pulling the tubing our for a simple disconnecting work time for connecting or disconnecting is 1 Or 2 Seconds. The direction of the tubing can be easily changed according to its required after Installation. Sealing for tube connection is maintained perfectly on the tube allows a maximum capacity flow. Every part inside the Joint is completely fixed, this no loss of inside part such as sleeves, and nuts. 

Size : 4mm To 16mm
Threading Size : M.S. To ½ ' BSP.
Pressure : 0 To 7 Kg/Cm2
Flowing Medium : Air, Gas, Oil, Water.
Tempreature : 0 To 70 C

P. U. Fitting 

This are Ferrules pneumatic fittings in blue anodized Aluminum, Brass M.S., S.S. They are available in all fitting range like, Straight connector, Bulk Head Connection Elbow, Tea & Swivel type Flow Control Valves. The Fittings Are unique for their Simplicity, easy assembly and pressure retention Upto 150 PSI. They do not need any Ferrules or Inserts, are leak proof and requires less time for installation as compared to ordinary Compression Fitting.

USES : This Fittings are used for Compressed Air, Light, Gases, Water Lubricating Oils. This Fittings are suitable for P.U. Tunings.
Size : PU3 To PU 12
Threading : M.S. To 42 BSP
Pressure : 0 To 7 Kg
Temperature : 0 To 70 C

Quick Release Coupling
Quick Release Coupling eliminate valves and Screw on fittings in many Pneumatic, Hydraulic and Chemical Systems. The Permits easy, safe, Quick and reliable connection between delivery lines, Pressure Hoses, and a wide range of equipment, Quick Release Coupling make connection (Or Disconnection) of fluid System as easy as Plugging in an electrical Outlet.

Couplings are available in various materials, Sizes, and end connections for 50 PSI To 10,000 PSI Pressure ratings, in three basic Types 1. (S.C) Single Check Valve, 2. (D.C) Double Check Valve, 3. (S.T) Straight Through.

USES : Quick release couplings are ideal for compressed air installations, Hydraulic equipment, Pneumatic instrumentation, Fluid transfer lines, Refrigeration Industry, Fuel supply installation, fuel oil burners, Bulk loading and unloading and test benches etc. In fact, whatever your Applications. UNIQUE FEATURE OF THIS Q.R.C. IS THAT THESE ARE INTERCHANGEABLE.

Materials : C.S.,SS 304, SS316, Brass
Size : 1/8 BSP To 2" BSP
Pressure : 50 PSI To 10,000 PSI
Temperature : 232° C Max.
Media : Air, Water, Gas, Chemicals Etc